knitting rotate stand

modular rotating knitting stand. It is assembled from several parts into one structure.

You can make it with clips (1) or with 20x10x2mm magnets (2).

This is the second version of the model, and the first one has proven to be effective.

It is easy to assemble and disassemble for storage.

You can print 2 versions - clips and magnets

For clips print:
1.clips-for-base

1-2.spire-screw (if you have the screw) or 1-2.spire-clips (can connected without glue)

1-2.rotate base-skrew (if you have the screw) or 1-2.rotate-base-clips (can connected without glue)

1.Base-clips

1.Hold ring-clips

For magnets print:

1-2.spire-screw (if you have the screw) or 1-2.spire-clips (can connected without glue)

1-2.rotate base-skrew (if you have the screw) or 1-2.rotate-base-clips (can connected without glue)

2.hold-ring-magnet

2.base-magnet

I made it Rhinoceros7 in STL format. Print main settings - 0.2mm layer, 1.75 plastic, PETG