basecap holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.31 – €2.83 net (excluding VAT)
For file: Correctly rotatet model for printing on Prusa Mini / oben_02mm_petg_mini_2h46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.57 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 2.77 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Model information
- Source
- Printables
- Category
- Men
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print “oben” and “unten” and mount the cap holder to any wall.
I Also added a “bracket” part, which can be used for doors. The default “bracket” is for doors with 20mm width. If you need other dimensions open the f3d file in fusion 360, go to parameter and change “doorwidth” or “thighlength”.
If you don´t have fusion and need other dimensions, message me.