1 / 5
Finned Nose Cones for Estes FLASH Model Rocket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Several nose cone options for the Flash rocket or any other with a inner tube diameter ~26.4mm.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 46
- Makes
- 2
- Views
- 325
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modeled with an insertion diameter of 26.4mm. I printed 0.20mm layer silk PLA which ended up with a an actual diameter of about 26.05mm for a slightly loose fit matching the original nose cone. Depending on your fit, you might find XY compensation useful to get it dialed. Or sandpaper ...