1 / 2
Fairing for Estes FLASH Model Rocket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple model with smoothed features. Useful for replacement or custom parts.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 134
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modeled after the original with some body contours adjusted.
I printed in silk PLA and transparent PLA. The silk was a little loose and the other very snug with the same settings. I enlarged the ID 0.4mm. Whatever you do, don't force it onto the body. Adjust scaling or XY compensation depending on your exact calibration if needed!
For both test prints I used inner and outer brims. Probably not necessary if you have great adhesion and your settings dialed, but it worked well ...