1 / 1
Bird feeder for tallow balls
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bird feeder in 4 separate parts. designed to have a press fit. and be glued with CA glue. fit's two tallow balls.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Tolerances are set for Sovol SV06+
The Sticks have a press fit in base and roof section. (glue with CA)
Sticks have been printed solid
The base and lower ring have a bayonet connection.
The roof to be printed right side up. I used a 4x4mm support lattice to save print time.
The interfacing parts with sticks, i made sure slicer made the surrounding 5mm solid. otherwise all printed with 20% infill adaptive cubic.
Printed with PLA, print time approx 12 hrs.