1 / 3
V BLOCK AND CLAMPS FOR SAW CUTTING
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
small v block with clamps. has captive 1/4-20 nuts for strong threads
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
My porta band with a stand did not hold onto small rods well so I made this v block you clamp in vise to hold parts.
I would print on strength setting. I used some 1/4-20 socket head cap screws.
Also get some standard 1/4-20 nuts. for captive nut. The cap ones are pretty snug and bottom ones stayed well.
I modeled nut slots after a, https://www.mcmaster.com/95505A601/