Tripod for Phones (100% 3D-printable)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.13 – €1.39 net (excluding VAT)
For file: Tripod_Vice_Pusher_0.2mm_PETG_MINI_1h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.26 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.48 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A foldable "medium size" Tripod mainly for phones that is fully 3D-printable!
- Rating
- 4.826 / 5
- Likes
- 280
- Downloads
- 2,620
- Makes
- 24
- Views
- 15,905
- Reviews
- 23
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I brought a new phone a while ago and I wanted to print a Tripod to take pictures of the night sky. However, I didn´t quite find anything that I wanted, so I decided to design my own.
This is my first project I upload so I don´t really know how well it prints with other printers and so on. The tolerances are relatively tight and quite a few parts need to fit so it´s not tooo easy to print I´d say. However, I would like some feedback, to know what I could improve.
NOTE:
Screws and Pins should be printed with 100% Infill, for better stability.
“Tripod_Ball-Joint_Base” should be printed vertically with the threading at the bottom (support on build plate).
“Tripod_Vice_Base” also vertically with the “Ball” at the top (support on build plate).
“Tripod_Leg” horizontally with support on build plate.
PETG/ABS… is recommend, it should work in PLA, however I don´t think it is the right Material for a Tripod. (I printed in Prusament PETG)
Also, you can use the hole in the Leg to put 1 or 2 Cent coins in it, to lower the center of mass and ultimately the stability of the Tripod.