Coffee funnel 51mm magnetic

⚠ Will not fit stock DeLonghi baskets (they have too wide brim)

Magnetic dosing ring for 51 mm baskets. Outer mounting - no need to WDT again after removing funnel.

Magnets: 6 pieces, size 4x2. Hole size: 4.15 x 2.2.

Printing suggestions:

1. Print upside down

2. For precise holes use

   1. precise wall

   2. print outer wall first (outer/inner)

   3. if no success, then use “XY hole compensation" setting

   4. or you can just glue magnets

3. For quality use seam setting “scarf joint”

   1. contour and hole

   2. wide external perimeter width (for example, on 0.4 nozzle use 0.6)

   3. 50% scarf print speed

4. Might need “arachne” wall generator with these settings