Template for precise belt ends 2mm-30mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Universal template / pattern for creating symmetric belt ends. 2mm to 30mm width of belts.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 67
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Template for creating symmetric and consistent belt ends. The shape is simple geometric "half circle" strap end. Includes high visibility numbers to quickly select the correct width. Can be alternatively used for measuring of belt width.
The starting width is 2mm, and then the width increases in 2 mm increments up to 30mm.
The model includes a ridge (Rib at edge) that is 0.4 wide to accomodate 0.4 wide extruder. The rib height is 0.8 to accomodate 4 layers of 0.2 layer height. Slice the model to your desire. My print was done on HT90 - see photos.
The ridge works like a stamp - dampen the leather, align it with the straight section of the belt end and then press the ridge firmly into the leather. The imprint is your guide. The rib is visible in the closeup pictures.
Alternatively you can use the flat bottom side as a guide for cutting or marking if you do not want to use the ridge, your printer cant print it, or you prefer to just trace the outside of the template.
Loosely inspired by the very cheaply made, very expensively sold template Tandy / Craftool 3620-00 that misses the ridge and is in inches instead of mm.