1 / 25
OO Gauge Box Wagons v2 (MWA, MWA-B and IOA) — image 1
1 / 25

OO Gauge Box Wagons v2 (MWA, MWA-B and IOA)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

OO Gauge box wagons in three variants, based on three real British wagons. Incremental improvements over my original…

Rating
5 / 5
Likes
39
Downloads
552
Makes
1
Views
3,303
Reviews
1

Updated at source:

Model information

Category
Vehicles
License
GNU General Public License v2.0

OO Gauge box wagons in three variants, based on three real British wagons.

Incremental improvements over my original box wagons with a new IOA variant in yellow.

Source code (OpenSCAD and some python) is on Github

There are three variants: MWA (green), MWA-B (grey) and IOA (yellow). Versions with and without the embossed logo on the are available. See below for more details.

I've also included a selection of randomly generated gravel piles which can be printed separately to insert into the wagons.

Assembly requires up to eight 4mm M2 screws or hot glue. There are square pits in the bottom of the 'top' and top of the 'base' to allow space for hot glue without changing the shape of the finished wagon, alternatively you can use small (4/5mm) m2 screws - but the glue is more reliable. The bogies require a 10mm M3 screw and two M3 washers (one above and one below the bogie, to help with rotation). The bogies provide fixings for a dapol-style coupling, my 3D printed design works well. The brake wheels, cylinders and buffers should slot in with only a little encouragement - if needed you can clear out the hole by first screwing in an m2 screw, but don't clean the hole too much as they rely on friction to stay in. Since the small slot-in components are easy to snap I recommend printing them in something slightly more flexible than PLA, like PETG.

The main body of the wagon is split into two files ("wagon_top" and "wagon_base") to avoid too much warping when printing. Alternatively the entire wagon is avaible as "wagon_wagon". Good base adhesion is required for printing the top of the wagon. Even with good adhesion there is a slight line of warping, but this is mostly not too visible.

The bogie requires scafolding only on the underside of the coupling holder. If you want a more accurate, but harder to print, version of the bogie set BOGIE_EASY_PRINT to false.

MWA

Uses the MWA_wagon_*.stl files. The four-pronged brake wheel (white PETG) slots into the sides of the wagon base. The two brake cylinders (black PETG) slot into the bottom of the wagon base. Print the following:

  • MWA_wagon_base: Green PLA

  • MWA_wagon_top: Green PLA

  • MWA_wagon_bogie (x2): Black PLA

  • MWA_wagon_brake_cylinder (STL contains two objects): Black PETG

  • MWA_wagon_buffer (x4): Black PETG

  • MWA_wagon_brake_wheel (x2): White PETG

MWA-B

Uses the MWA-B_wagon_.stl files and some MWA_wagon_.stl files. The three-pronged brake wheels slot into the sides of one of the bogies. This bogie should be attached at the end furthest from the brake cylinder - there is only one brake cylinder on the MWA-B. Otherwise the same as the MWA wagon.

  • MWA-B_wagon_base: Grey PLA

  • MWA-B_wagon_top: Grey PLA

  • MWA-B_wagon_bogie (x1): Black PLA

  • MWA_wagon_bogie (x1): Black PLA

  • MWA-B_wagon_brake_cylinder : Black PETG

  • MWA_wagon_buffer (x4): Black PETG

  • MWA-B_wagon_brake_wheel (x2): White PETG

IOA

Uses the IOA_wagon_.stl files and some MWA_wagon_.stl files. The brake cylinders are part of the base as they're also yellow. Brake wheels slot into the sides of the wagon base, like MWA. The IOA wagon uses the MWA bogies.

  • IOA_wagon_base: Yellow PLA

  • IOA_wagon_top: Yellow PLA

  • MWA_wagon_bogie (x2): Black PLA

  • MWA_wagon_buffer (x4): Black PETG

  • MWA_wagon_brake_wheel (x2): White PETG

Couplings

  • coupling_wide_dapol_inline_hook (x2): Black PETG

  • coupling_hook_inline (x2): Black PLA

MWA-B and IOA photos by Foulger Railway Photography, MWA photo by Train Photos

Update 9th March: fixed height of couplings.

Update on 25th March: finally fixed coupling position for non-hornby variants properly, also now have a NEM variant.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament: PolyMaker PLA

Category: Vehicles

Tags