1 / 1
Prusa MINI MGN12H Y Axis Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
How to add MGN12H Rails to your Prusa Mini
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Requirements
Print Y Stopper 2 times
1 MGN12H block per Rail
Drilling guide
Instructions
Drill two holes into your y Carriage using the drilling guide, i would recommend to drill 3,5-4mm holes for alignment, and then place a washer under the mounting screws.
Add the 2 Y Stoppers to your Y Carriage, where the original bearings were mounted.
Mount your new Y Carriage to your 2 MGN12 Y Rails.