1 / 2
enclosure exhaust to hoover bag adapter — image 1
1 / 2

enclosure exhaust to hoover bag adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

enclosure exhaust to hoover bag adapter

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Public Domain

I got kicked out of my shared garage because I was in and out changing the filament on my 3d printer (Shame on them)

So......

I ordered an enclosure and now the printer is in my kitchen....

Because it is winter and all, I did not want the window open all the time.

they say the micro particles, even from pla printing can be harmful, I decided to make an adapter from the enclosure exhaust to a hoover bag, this way (Hopefully) i can print my merry way in the cosiness of my kitchen without coughing my lungs out anymore, It has been printing for a few hours now and I have a tickle free throat!

Um I can not take any responsability if this does not work for you but I would like your feedback if you have problems and I would then take down the post!

if I open the enclosure a crack,the fan is creating plenty of negative pressure so fingers crossed.

if you are not certain of the seal, I suggest you hoss a load of duct tape around the joins, to be fair,the hoover bag should not need changing for a decade....

one other thing.... my exhaust hose is 73mm internal diameter and I made the adapter to fit my hoover bag. this might be a problem if yours is different. if you need a different size message me with the dimensions and I will make another.