Drill Stop round box (3 - 8mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just another box for these small drill bit stops.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Just another box for these small drill bit stops: https://www.printables.com/model/149964-drill-stop
The box can hold the drill stop itself and up to 8 inserts (one is inside the drill stop). Lid has "Top" marking.
I printed it using PLA+ with layer height 0.2mm, outer perimeter width 0.6mm (for thread), inner perimeter width 0.5mm. As always with threads, do not speed up on external walls (especially on internal thread). In my case outer wall speed was 70mm/s.
STEP files and OrcaSlicer 3mf project file with settings I used to print are also published.
P.S. Stopper with M3 drill bit is on the photo.