Improved High-Precision Encoder Knob with Gear-Down for Hercules DJ Controller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
High-Precision Encoder Knob with Gear-Down for Hercules DJ Controller, universal fit for various belt sizes and knobs
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 10
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
Hey guys! I improved my previous design so it is now much simpler and requires less special parts.
Like last time this model allows for a gear-down reduction so you get a more precise control. Thanks to the spaced out mounting holes, you can use a wider variety of O-rings or rubber bands as the driving belt.
Also I designed it so you can use any other knob design you like on the small wheel! The peg is modeled after the original one from the actual DJ controller :)
What You’ll Need
Print each file once (Base, Knob, Knob_Small, Knob_Big)
1× O-Ring or rubber band with 40-50mm diameter
1x M3x8 screw or similar
Double-sided tape
Printing Instructions
No special settings required. Use any solid filament you prefer.
Recommended: 20% infill with 3 walls.
No supports needed.
Assembly
Remove the stock encoder knob from your controller.
Apply double-sided tape around the knob area.
Attach the Base to the controller.
Push the big Knob onto the shaft.
Attach the small knob with the M3 screw to the base, don't make it too tight so it can still spin
Mount the O-Ring or rubber band around both knobs
Push the knob on the small knob
I hope you enjoy my design :)