10 inch Rackmount for HP T740
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1.5U enclosure for the HP T740 in 10 inch rack format.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 91
- Makes
- 1
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
***UPDATE 2/26***
Added a <BETA> small bed version, with separate ears , will just fit 200mm bed when rotated 45° 210mm build height.
Requires 4 x M4 conical head screws, no longer then 15mm. to attach ears to main frame.
***UPDATE 1/26***
Added Oval version that is quite a bit quicker to print. With my normal print settings it printed almost 3hrs faster.
Description
This is 1.5U enclosure for the HP T740 in 10 inch rack format. Designed to be printed faceplate down, no supports are needed requires 255mm bed or larger. I would recommend PETG at a minimum as this little machine can run pretty warm at full tilt.