infill types - test cubes + holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cubes for showcasing different types of infill in PrusaSlicer.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 51
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution — Noncommercial
Display cubes showcasing different infill patterns generated in PrusaSlicer.
Each cube represents a different internal structure, making them suitable for visual comparison or educational purposes.
The holder features an ISO M9×1.25 thread, allowing you to replace the legs with your own custom design if desired.
Infill percentage varies based on type, so the difference is quite nicely visible. I suggest cutting a piece after printing from support and adaptive cubic to see the difference.
30x30x20mm cubes. Printed with 3 bottom layers and 1 perimeter. PLA was used at 0,15mm layer height and 0,4mm nozzle.
Octagram spiral - 20%
Zig Zag - 15%
Lightning - 30%
Support Cubic - 15%
Adaptive Cubic - 15%
Archimedean Chord - 20%
Honeycomb - 20%
3D Honeycomb - 10%
Gyroid - 15%
Hilbert Curve - 20%
Concentric - 20%
Line - 15%
Cubic - 15%
Stars - 20%
Rectlinear - 15%
Aligned Rectlinear - 20%
Grid - 20%
Triangles - 20%