1 / 5
Prusa MKxS Pi Camera V2.1 Mount remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remixed version of the MK3S Pi Camera v2.1 mount
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Some changes were made as the differences-section states. I use this with MK2.5S and custom built MK2 clone, but the camera position should be the same as in MK3 variants.
You'll need 1x 16mm M3 screw for the hinge and 4 10mm M2 screws.
Openscad source here: https://github.com/spegelius/3DModels/tree/master/PrinterParts/Prusa/RPi/Pi_Camera_V2.1_Mount_remix