Cab Over Engine for the RC SemiTruck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a COE design for the RC SemiTruck
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 227
- Makes
- 5
- Views
- 1,217
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I love the long nose truck but I also wanted a COE. Andrew gave me a good base to start with.
In addition to the regular parts, you need 8x 6mm x 3mm magnets. 4 magnets are placed in the stacks and the middle frame and hold the cab in place. 4 magnets are needed for the wind deflector.
Cab markers and horns can be glued or screwed to the cab.
Update 12.01.2026
- John was so kind and provided a shortened PCB. Therefore I've created the middle frame 33mm shorter. You can download the short PCB from his workshop of the Semi Truck.
Update 01.01.2026
- Uploaded the interior for the cab. Steeringwheel and chairs remain the same as from the original. You can glue or screw the interior to the cab.
- New cab, so that the interior can be screwed in.