1 / 4
Semi-recessed round drawer pulls
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Recessed drawer pulls.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Round 2-finger recessed drawer pulls.
Designed for 2" (~51mm) holes. I used a 2" forstner bit to make the recesses for my drawers.
Designed to be screwed in from the back side of the drawer-face with M3 wood screws. There is 6.5mm of depth in the mounting holes, so use appropriate length screws depending on wood depth.
There is an optional trim bezel as a separate piece for a cleaner look. It press fits around the outer diameter of the drawer pull.
There is also a model for a screw hole guide to help make sure your mounting holes are aligned.