1 / 9
Putting Gates
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Modelled after a popular putting gate style.
Putting gates come in 3 sizes small-50mm, medium-60mm and large-70mm.
Each gate requires 2 base parts.
Supplied are a few options.
Print with mmu or multiple extruders.
One side marked only.
Both sides marked.
Print with a single extruder.
Colour change at layer 21.
I used PETG (with a .4 nozzle) though feel free to use your choice. Please watch you setup/tolerances these are tight. Print the arches first and then print 1 foot to check and resize if required (might only be a elephant foot issue on some printers setup