Pinecil V2 Dremel Press Adaptor Workstation 220
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter mount is designed for the Dremel Workstation 220 and the Pinecil soldering iron for heat set inserts
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 49
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter mount is designed for use with the Dremel Workstation 220 and the Pinecil V2 soldering iron for applying heat inserts. It fits centrally within the Dremel holder and is secured using a 3/4 inch x 12 revolutions per inch (12rpi) nut.
This model was modified from Fatman80s Model
BOM (Bill of Materials):
M3 Nut: QTY = 1
M3 x 8 Socket Cap Heat Screw: QTY = 1
Material:
Any Material will work. I printed in PLA.
Slicer Settings:
Wall Thickness = 0.2
Infill = 20% minimum
Supports = Tree Supports Enabled
Wall Loops = 3 minimum
Orientation = Thread facing up