CNC Shield + Arduino Uno Case + Fan
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.23 – €8.84 net (excluding VAT)
For file: Uno CNC Shield_0.2mm_PETG_MK3S_9h6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.04 excluding VAT (range midpoint).
- Weight reported by the author
- 84 g
- Print time reported by the author
- 9.1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a case to house an Arduino Uno board with CNC Shield (V3), plus mount an 80mm fan.
- Rating
- 4.667 / 5
- Likes
- 53
- Downloads
- 503
- Makes
- 3
- Views
- 2,865
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case to house an Arduino Uno board with CNC Shield (V3), plus mount an 80mm fan. The case and fan are assembled using M4 cap head screws. You can use individual screws for each layer, or longer screws for the whole assembly.
Designed to retain the board assembly in place, and provides good ventilation around hot parts such as the stepper drivers. Fan is intended to suck air through and out of the assembly.
Mounting holes for 8G wood screws for mounting to your project.
Print in PETG 0.2mm layer height 25% infill