1 / 2
Losi Promoto head repair insert ball — image 1
1 / 2

Losi Promoto head repair insert ball

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Repair part for a Losi Promoto rider figure. Printed from TPU, it allows the helmet to be reinstalled, and rotated.

Rating
0 / 5
Likes
7
Downloads
28
Makes
0
Views
368
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a repair part for a Losi Promoto rider figure. The helmet can tear off from repeated flips, but leaves a sturdy glued bung in the torso. This ball with stem is printed from TPU or other flexible material. It inserts into the hollow helmet, and then into the bung in the rider's torso.

There are 2 versions uploaded here. The version "Promoto Head peg Final, 45mm" is ready to print, with plenty of adhesion to the bed. It will feel loose in the helmet, but once fully installed gives just enough friction to be steady, but enough motion to reposition the head and allow flex on impact.

The second 48mm version needs to be oriented and sunk into the print bed for adhesion. I added this as an option for creativity and making one's own head. As an example, I used CA glue and fabric holiday decorations to make a Santa head for the holidays, or Headless Horseman pumpkin head. The possibilities are endless!!

Print at 2-3 walls, with 8-10% Gyroid infill. Slow speed for best layer adhesion, and use modifiers to add more walls to the stem area if needed.

Tags