Spool Roller Stand
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.01 – €4.90 net (excluding VAT)
For file: spoolstand_03mm_pet_mk3s_3h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.45 excluding VAT (range midpoint).
- Weight reported by the author
- 76 g
- Print time reported by the author
- 3.72 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Spool roller with bearings.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 384
- Makes
- 4
- Views
- 3,757
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Spool roller with bearings.
Bearing: 4 x (8mm inner dia)
Screws: 4 x (m3x16)
nuts: 4 x m3
All Files attached, can upload fusion design if someone wants it.
Print instructions
Used prusa slicer mesh modifier feature to embed honey cone pattern in the middle.
Printed using prusa orange PETG - gcode attached for MK3s.
Also include is the prusa project file which will print a complete set for one roll.