Angel of Death 3 hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angel of Death hueforge
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 1
- Views
- 60
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Project: Angel of Death 3.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
PLA Default White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue Gray
At layer #7 (0.64mm) swap to Grey
At layer #8 (0.72mm) swap to White
At layer #14 (1.2mm) swap to Black
At layer #17 (1.44mm) swap to Red
At layer #23 (1.92mm) swap to White for the rest.