Snaggletooth - Motorhead logo - Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The cutout Snaggletooth
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 75
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
My first attempt at Hueforge, I hope you like it 🤘
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 146.18x170mm in size
Filaments Used:
#000000 PLA BambuLab Basic Black - Transmission Distance: 0.6
#686a6c PLA BambuLab Matte Nardo Gray - Transmission Distance: 1.5
#8e9089 PLA BambuLab Basic Gray - Transmission Distance: 2
#ffffff PLA BambuLab Basic Jade White - Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Nardo Gray
At layer #13 (1.12mm) swap to Gray
At layer #20 (1.68mm) swap to Jade White for the rest