Sunlu S1 filament dryer upgrade (spool jam fix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small upgrade for hanging the filament spool. 10mm bearing diameter
- Rating
- 2 / 5
- Likes
- 7
- Downloads
- 29
- Makes
- 0
- Views
- 242
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Sunlu S1 filament dryer - has an inherent flaw - sometimes spools near completion (i.e. light spool) can jam in the dryer. Jamming causes for the print to fail, and on engineering filaments - it can "bake" inside the nozzle making it uncleanable.
There is a similar model (https://www.printables.com/model/419403-sunlu-s1-filament-roller-and-binding-fix), but this one is designed from scratch, no unnecessary fillets and bevels, designed for FDM print and made much stronger. Also note - this model is for 10mm bearing on a shaft(model mentioned in the link is for 12mm). 100% infill, ABS preferrable (due to high temp in the dryer). Has a "lock" for a bearing when seated.
Please make sure that the shaft rotates freely on a bearing - the shaft MUST NOT rub on a printed body. If your printer is dimensionally accurate - it will print without any need of filing and or sanding.
Solidworks file included - modify to your heart content, but please share.