1 / 4
Coathook for geeks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hang your coat on a real M24 screw
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 45
- Makes
- 3
- Views
- 386
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hang your coat on a real M24 screw!
Tested with up to 15 kg load.
Printed in PLA, 0.2 mm layer height, 20 % infill, 4 perimeters, no support.
Prusament PLA Galaxy silver.
First screw the bracket to the wall with 3.5-5 mm screw . You can use a nail to prevent rotation.
Put the M24 printed screw on the bracket.
Secure the big screw with a small M3 headless (or not) screw .
Enjoy :-)