LayersFactory
Report model
1 / 4
Mason Jar & Fire Cup Storage Crate Customizable — image 1
1 / 4

Mason Jar & Fire Cup Storage Crate Customizable

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Thomas Ng

Thomas Ng

@ThomasNg_2449745

Customizable storage for your mason jars or fire cups. Optional amounts of jars, different jar sizes, handles

Rating
0 / 5
Likes
4
Downloads
5
Makes
0
Views
92
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Organizers
License
Creative Commons — Attribution — Share Alike
DetailsFiles (2)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (2)Related

Customizable Mason Jar & Fire Cup Storage Crate

A fully parametric storage crate for organizing mason jars and fire cups (cupping therapy equipment) upside down.
Perfect for massage therapists, home organizers, or anyone needing secure jar storage!

🎯 Key Features

  • Dual-Ring Grip System - Inner and outer rings securely hold jar lips in place

  • Fully Customizable - Supports up to 4 different jar sizes with 0-4 of each

  • Grid Layout - Automatically creates compartments with divider walls

  • Optional Handles - Add handles on 2 or 4 sides for easy carrying

  • Side Spacers - Optional spacers prevent jars from shifting

  • Air Flow - 2mm ventilation holes under each jar

  • Rounded Corners - Comfortable, smooth edges throughout

📐 Default Configuration

Configured for three fire cup/mason jar sizes (2 of each):

  • Large: 40mm/56mm lip, 76mm width

  • Medium: 36mm/51.4mm lip, 63mm width

  • Small: 29mm/45.4mm lip, 51mm width

Creates a 3×2 grid approximately 202mm × 82mm × 46mm tall

🔧 Customization

All parameters adjustable via OpenSCAD Customizer:

Jar Quantities - Set 0-4 of each jar type
Jar Sizes - Inner/outer lip diameter, total width, wall height
Crate Settings - Ring thickness, spacing, wall thickness, corner radius
Spacers - Enable/disable, adjust width and gap
Handles - None, left+right, top+bottom, or all four sides
Visualization - Toggle jar preview on/off

📏 How to Measure Your Jars

  1. Inner Lip Diameter - Inside of jar mouth

  2. Outer Lip Diameter - Outside of jar lip/rim

  3. Total Width - Widest part of jar body

  4. Wall Height - Desired minimum crate wall height

🖨 Print Settings

  • Layer Height: 0.2mm

  • Infill: 15-20%

  • Supports: Not required (handles may need supports)

  • Material: PLA or PETG

  • Orientation: Base flat on bed

💡 Tips

  • Enable jar visualization to verify fit before printing

  • Works best with jar lips 6-10mm thick

  • Increase ring thickness if jars feel loose

  • Enable spacers for heavy jars or extra stability

  • Handles add ~30mm to total height

Tags

organizercratestoragemasonjarbdsmkinkfirecup