Fusebox Garage Door Opener Holder for 2020 Subaru Crostrek
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stealth mount for GDO inside fuse box cover that aligns it for convenient thumb button access. Parametric F360 included.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Fast, simple, functional print to hide your GDO (Garage Door Opener) in the fusebox door of a 2020 Subaru Crostrek (will likely fit other years/models.)
Print Settings
0.2mm Layer Height
Any material (PLA is fine)
No supports
File Notes
Parametric F360 file included
Use the width and height parameters to set the size of the opening to fit your remote
Attachment Method
I reccommend something like double-sided carpet tape
I used 1/4" Wide XFasten tape
Other brands likely will work fine
Make sure it's non-permanent/non-marking and high tack
This will keep the fuse diagram intact, and make this mod more lease-friendly
Be sure to test any tape you use for permanence
Installation
Remove fusebox cover
Take picture of the fuse diagram for later reference
Lay two strips of tape on the bottom of the bracket (on either side of the opening)
Press it down onto the cover
Ensure the taller wall faces AWAY from you (towards the headlights)
Add a strip of tape to the bottom, inside the opening
Add a strip of tape to the back wall (the tall part)
Drop your garage door opener into the slot (the default opener is a tight fit with tape, just push it in)
Re-attach fusebox cover
Usage
Open the fusebox door
Press the opener button
Wait for the garage door to open
Nothing happens right away, click it again
Door starts opening and closes again.
Expel expletives.
Click the button again, firmly, and put your hands in the air like a stickup.
Drive into the garage, finally.
Hypothesis
Garage doors follow the same laws of physics as USB ports