Wine Glass XT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wine glass ideal for glassless parties.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 499
- Makes
- 2
- Views
- 1,579
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This work builds on my previous model Stackable shooter. To successfully complete the wine glass, I used everything I learned on a simple shooter and I had to tune a lot of other things. The hardest part was adjusting the parameters of the narrow stem of the glass. With the parameters that worked on the shooter, it did not turn out well.
To achieve a good printout, it was necessary to radically reduce the speed below 20 mm/s, reduce the nozzle temperature to at least 250 ° C and intensify cooling. The included gcode does not need to be tuned during printing.
Again, I used a 0.8 mm nozzle. Only 0.3 mm proved to be the correct layer height. With this design and layer height, the spiral mode starts at layer 210.