Whistle
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.55 – €0.68 net (excluding VAT)
For file: Whistle Pre-Sliced.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.61 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 47.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple, functional, and extremely loud key-chain whistle
- Rating
- 4.825 / 5
- Likes
- 229
- Downloads
- 5,856
- Makes
- 55
- Views
- 11,255
- Reviews
- 40
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Filament: PLA
Infill: 20%
Nozzle: 0.4
Nozzles temp: First layer 210c, Remaining layers 205c
Bed temp: First layer 60c, Remaining layers 60c
Supports: yes
Print time: Approximately 30 minutes
Quick Note: I would recommend you put the "Supports" setting on: "Support on build plate only" if you have Prusa Slicer.