Wen Track Saw wrench storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A place to put the allen wrench for the saw track so it doesn't get lost! Stores in the channel of the track.
- Rating
- 4.5 / 5
- Likes
- 33
- Downloads
- 198
- Makes
- 2
- Views
- 976
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Nowhere to keep the allen wrench that came with your track saw?
Well, fear no longer! I too used to be afraid I would lose the 3mm allen wrench that came with my Wen 100" Track Saw, but now that I have printed this amazing rectangle of PLA +, I can sleep at night! Simply print (with a brim) this fantabulous creation, remove brim and slip into the channel that faces the bottom of the track saw, then slip in your allen wrench! Bam! Instant gratification!
This is held in place by friction, so you can easily slide it in and out of the track as needed.
I printed this using IIID Max PLA+ with a nozzle temp of 210C and bed temp of 60C. Resolution: 0.2mm and infill of 10%.