Modular Shanling M0 Pro/M0s Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and durable case that needs no hardware!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 63
- Makes
- 0
- Views
- 276
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
[ALL PARTS ARE PREORIENTED FOR PRINTING AND OPTIMAL STRENGTH]
This modular case can be worn as a watch, clothes clip, or standalone in your pocket! It requires no hardware, and only needs glue and two pieces of 1.75mm filament. All parts can be printed without supports except for "peg", "case hinge", and "case clip".
The watch bands and strap must be printed out of TPU, I recommend 2 walls and 20% gyroid infill. The two pieces of 1.75mm filament should be cut to 23mm lengths. I recommend PETG for good tensile strength. The rest of the parts can be printed in PLA or any other plastic. You will need to glue the "peg" onto the "upper band". I recommend a flexible bond glue like contact cement, though high temp hot glue may work as well.
Watch Build Steps (example photos included above):
1). slip the M0 Pro/M0s into the case, make sure it clicks in place
2). slip "band strap" over "upper band"
3). glue "peg" onto "upper band" (there is an arrow engraved on the flat face of "peg", make sure it is facing the end of the "upper band")
4). attach bands to the "case hinge", make sure the down text is facing the bottom side of "case hinge"
5). insert filament lengths into the hinge connections
6). slide the watch band assembly into the rail of the case, make sure it clicks in place
Done!