1 / 2
Wall outlet plate for speaker (or other small low-voltage) connection — image 1
1 / 2

Wall outlet plate for speaker (or other small low-voltage) connection

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Outlet plate designed so the back recesses into a wall and provides an RCA connector for a speaker

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
32
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial — Share Alike

This model is quite specific to a requirement I had while fitting out a new room with a surround sound system. Maybe it's useful to someone else too though.

This is a wall mount plate designed to take an RCA-style ("phono") connector so that speaker wiring can be hidden inside a wall. The back part of the plate is recessed into the wall, and the front part is designed to fit a standard UK "dado" style electrical light switch back box (note that's not the usual square electrical light switch box used in the UK, there's a less common small, narrow, rectangular box often referred to as a "dado" box).

By recessing the connector itself into the wall, it prevents the plug and cable sticking out once it's all installed. I used right angle plugs and the cable comes out almost flush to the wall. The whole thing can be easily hidden behind a wall mounted speaker.

There are two parts to this print. The front panel needs to be printed (front face down) separately from the back part (which should be printed back face down). the two parts can then be glued together. There's a recess in the front panel for the back to fit into, so alignment is easy.

There are two different "back" parts uploaded here. You only need one of them to make up a panel, the only difference is that one back has a single hole (for connecting a single speaker), and the other has two holes (for a stereo pair).

You'll need some panel mount RCA sockets to fit the holes in the back of the panels. These usually fit through from the front and have a nut on the back to hold them in place.

The concept would be easier to explain if I had a photograph of my outlet plates in situ. Unfortunately they're now hidden behind my speakers. If I can find a suitable photograph, I'll add it later.