iPhone Stand Remix
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.33 – €2.84 net (excluding VAT)
For file: iPhoneStandV1_0.4n_h200_PETG_MK4SMMU3_2h29m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.58 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 2.48 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Quick 'n dirty desktop stand for convenient iPhone viewing. No hole for cable; can be charged only if horizontal.
- Rating
- 4 / 5
- Likes
- 3
- Downloads
- 35
- Makes
- 1
- Views
- 159
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
See the original model.
Although it was originally designed for non-Max iPhone versions, it's also working well with an iPhone 17 Pro Max.
Be sure you have good bed adhesion prior to attempting this print -- the skeletal design leaves a relatively small footprint. That being said, despite warnings from Prusa Slicer, I've had 2 for 2 successful prints with no brim.