1 / 6
Shoehorn Wall Holder – Simple Design in OpenSCAD
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple wall holder to keep a shoehorn in one place, and easy to reach in the hallway. Mount with optional screw holes.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I made this small wall holder to keep my shoehorn in one place and easy to reach in the hallway. It’s sturdy, practical, and does the job well. Fits shoehorns up to 28 mm wide at the top.
Size:
Width: 36 mm
Depth: 33 mm
Screw holes: 3 mm
Center screw hole: 4 mm
You can mount it with one screw in the middle or use both side holes for extra stability.
You’ll need a bit of support when printing.
Happy Printing!