1 / 14
Modulares Wandhaken-System (Schiebe-Verriegelung & Zum Kleben)/ Modular Wall Hook System (Slide-Lock & Adhesive Mount) — image 1
1 / 14

Modulares Wandhaken-System (Schiebe-Verriegelung & Zum Kleben)/ Modular Wall Hook System (Slide-Lock & Adhesive Mount)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modulares Wandhaken-System / Modular Wall Hook. Schiebe-Verschluss & Klebeband/Slide-lock & adhesive (20x50mm). PETG.

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
32
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Vorab: Aktuell enthält das Set bereits mehrere verschiedene Haken-Formen für unterschiedliche Einsatzzwecke (z. B. Standardhaken, Schlüsselhalter etc.). Weitere Varianten werden im Laufe der Zeit folgen!

Mit diesem modularen System könnt ihr euch die passenden Haken selbst zusammenstellen, wobei die Wand-Grundplatte immer gleich bleibt. Die Befestigung erfolgt unsichtbar über doppelseitige Klebestreifen. Die Aussparung ist perfekt optimiert für Klebepads im Format 20 x 50 mm (Klebefläche 40 mm, Dicke 0,65 mm) – dies entspricht genau den Maßen von handelsüblichen tesa® Powerstrips (Größe Large) oder baugleichen Alternativen.

Zusammenbau & Montage:

  1. Der gewünschte Haken wird einfach in die Kappe.stl eingesetzt (Kleben ist nicht nötig).

  2. Der Klebestreifen wird auf die Platte.stl (auf die Seite mit dem Rand) geklebt.

  3. Die Wandfläche gründlich reinigen/entfetten und die Platte fest andrücken.

  4. Nun die Kappe.stl inklusive Haken auf die Platte aufsetzen und durch Verschieben verriegeln.

Dank des Schiebe-Mechanismus ist es jederzeit möglich, die Kappe abzunehmen und eine andere Hakenform einzusetzen, ohne die Platte von der Wand zu entfernen.

Hinweis: Alle Teile sind mit einer „TOP“-Markierung versehen, damit beim Drucken und beim Zusammenbau oben und unten nicht vertauscht werden.

Haftungsausschluss
Wichtiger Hinweis zur Belastbarkeit & Material:
Die maximale Tragfähigkeit des Hakensystems wurde nicht unter Laborbedingungen getestet und ist konstruktions- sowie materialbedingt endlich. Ich habe für mein Modell PETG genommen, da es flexibler und zäher als PLA ist – das sorgt für eine bessere Stabilität und verhindert, dass die kleinen Schiebe-Nasen beim Verriegeln abbrechen. Ich empfehle daher, ebenfalls PETG zu verwenden. PLA ist deutlich spröder und sollte maximal für sehr leichte Gegenstände (z. B. Schlüssel) genutzt werden.

Die tatsächliche Stabilität hängt massiv von euren gewählten Druckeinstellungen (ich empfehle mindestens 3–4 Wandlinien), der Druckqualität sowie der Haftkraft des verwendeten Klebestreifens ab. Die Nutzung erfolgt auf eigene Gefahr. Ich übernehme keine Haftung für Schäden an aufgehängten Gegenständen (z. B. Elektronik, Taschen), falls der Haken bricht oder sich von der Wand löst.

Translation:

Please note: Currently, the set already includes several different hook shapes for various purposes (e.g., standard hooks, key holders, etc.). More variants will follow over time!

With this modular system, you can mix and match the perfect hooks for your needs while the wall-mounted base plate always remains the same. The mounting is completely invisible using double-sided adhesive strips. The recess is perfectly optimized for adhesive pads measuring 20 x 50 mm (40 mm adhesive area, 0.65 mm thickness) – which corresponds exactly to the dimensions of standard tesa® Powerstrips (Size Large) or equivalent alternatives.

Assembly & Mounting:

  1. Simply insert your chosen hook into the Kappe.stl (no glue required).

  2. Stick the adhesive strip onto the Platte.stl (on the side with the rim).

  3. Thoroughly clean/degrease the wall surface and press the plate firmly onto it.

  4. Now place the Kappe.stl (including the hook) onto the base plate and slide it to lock it in place.

Thanks to the slide-lock mechanism, you can easily remove the cap and swap out the hook for a different shape at any time without having to remove the base plate from the wall.

Note: All parts are marked "TOP" to ensure that the top and bottom are not mixed up during printing and assembly.

Disclaimer
Important Note on Load Capacity & Material:
The maximum weight capacity of this hook system has not been laboratory tested and is ultimately limited by its design and material properties. I used PETG for my model because it is more flexible and durable than PLA – this provides better strength and prevents the small sliding tabs from snapping during locking. I highly recommend using PETG as well. PLA is much more brittle and should only be used for very lightweight items like keys.

The actual strength depends heavily on your chosen print settings (I recommend at least 3–4 perimeters), print quality, and the adhesive strength of the mounting strip used. Use at your own risk. I accept no liability for any damage to hung items (e.g., electronics, bags) if the hook breaks or detaches from the wall.

Tags