1 / 1
Lens hood for laowa 90mm f2.8 macro — image 1

Lens hood for laowa 90mm f2.8 macro

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Custom lens hood for sony FE version of the laowa 90mm macro. Friction fit.

Rating
0 / 5
Likes
0
Downloads
12
Makes
0
Views
42
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Laowa 90mm f2.8 lens hood designed for those who have lost theirs.

Features:

  • Uses the lens bayonet to mount.

  • Uses friction to stay in place instead of a neat spring :(

  • Does not interfere with filter threads or lens cap.

  • Anti reflection grating.

  • Grip pattern.

  • Short enough for 2x magnification to be usable.

  • May not actually help with flare, but looks nice and protects the front element.


Printing instructions:

  1. I would suggest matte PLA for anti reflective properties or maybe black TPU but print from whatever you wish. I'm not here to judge.

  2. Use the calibration ring to find the correct model scale before printing the lens hood. The calibration ring is identical to the hood bayonet and you can increase the size of it in X and Y by 0.1% until you've found the perfect fit. In my experience, a loose hood will not fit the lens at all when the size is decreased by about 0.3%.

  3. Apply same scaling to the lens hood.

  4. Print with the Laowa text upside down. This makes sure the reflection grating pattern comes out clean. Recommending the use of supports below the bayonet ring, but with good PLA these might be optional.

Different filaments and printers can be may require independent tuning. With the original measurements, the hood feels rather nice when made from matte PLA, but tight on rapid PETG.

Tags