BASIC - TP4056 Lithium Cell Charger Housing

TOOLS NEEDED:

------------------------

1 X 3d Printer

1 X Soldering Iron

1 X Phillips Screwdriver

MATERIALS NEEDED:

------------------------

1 X PCB Mount 18650 Battery Holder with Pins

2 X M2.5x6mm Flat Head Phillips Screws

2 X M2.5x7mm Brass Heat Inserts

1 X TP4056 Type-C Input USB Lithium Battery Charger Module

1 X 140mm Length of Hookup Wire (22AWG Minimum)

1 X 50mm Length of Hookup Wire (22AWG Minimum)

Super Glue or Epoxy adhesive

Solder

INSTRUCTIONS:

------------------------

1.) Print the BASE and LID using PLA or PET-G (15% infill and 4 walls)

2.) Print the POSITIVE INDICATOR using red TPU (10% infill and 3 walls)

3.) Print the LED LIGHT PIPE using clear TPU (10% infill and 2 walls)

4.) Snap in the two TPU printed parts into the LID

5.) Press the two M2.5 heat inserts into the BASE holes using a soldering iron

6.) Attach the TP4056 Charging Module to the BASE using Super Glue or Epoxy adhesive

7.) Solder the hookup wires to the PCB Battery holder (RED POS + / BLACK NEG -)

8.) Mount the PCB Battery holder to the base using 2 m2.5 screws

9.) Solder the wires from the PCB battery holder to the TP4056 Charger Module (RED POS + / BLACK NEG -)

10.) Snap the LID to the BASE  :)