1 / 1
Adjustable Maze for Busy Board
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A parametric, adjustable maze to screw down on a busy board.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 65
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A fully adjustable maze to screw down on an busy board. The sliders (pins) can be printed separately, the maze has enough flexibility to insert them after printing. Once screwed down, the flexing parts are held in place and keep the sliders captive.
Print settings: PLA, 0.4mm nozzle, 0.2mm layer height, 3 perimeters, no supports needed. The sliders were printed with 100% infill.
Screws: 5 countersunk screws, 2.5mm or 3mm diameter. (I used 2.5x16mm wood screws with a 14mm thick board.)