Mirage Pump and Run Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nerf Rival Mirage Pump and Stock Kit
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 28
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks for supporting me over the years! Files are now free for personal use.
Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper
Pump Kit: Pump up and out Rival Mirage! Pump, shoot, load, and be the mirage all in one swift motion!
Top load and mag fed, it was made to be fast and lightweight but was still limited to slower top prime. Now you can a pump kit and make it one of the fastest and most compact Rival blaster in your arsenal!
• Easy installation. No need to open the blaster or drill. Just swap some parts out and its good to go!
• Railed pump grip to add any of your favorite foregrips or accessories.
• Optional railed slide for optics. Railed version blocks the stock iron sights.
• Retains top loading and mag fed capabilities.
Stock Attachment: Is this real or is this... real? Hidden ball storage for quick reloads and dart scavenging? Lightweight but super stiff 6061 aluminum? And a sling mount?! I guess this isn't a mirage, but the Mirage stock.
• Top load up to 6 Rival rounds and easily access them from the large opening in front.
• Adds a maximum 5.5" of stock length for a compact form factor. You can slide it further inward on the rail to adjust for a shorter length.
Includes:
STL FILES for the 3d printed Mirage Pump Kit and Stock. Detailed text installation instructions.
*Also includes extra files for a double holed stock to adjust height, and a half dart stock to hold half darts.
*Requires additional hardware:
• 4-40 3/8" pan head machine screws OR M3x9 OR spare short nerf shell screws
• 8-32x1.5" pan head machine screws and nuts for stock and sling mount.
• 1/2x1/8”x8" or 12x3x205mm aluminum flat bars, OR a printed version is included in the kit too that works for the stock spring.
• 8mm diameter aluminum rod (or any stiff material) x 175mm length for the stock.
Tools needed: Screwdriver. Saw/dremel/something to cut metal flatbar and rod. If making metal priming bars, a drill and 3/32" metal drill bit is also required. Lighter/torch, mallet, and CA glue optional for stock.