1 / 1
Z-offset calibration print
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helps to calibrate z-offset
- Rating
- 5 / 5
- Likes
- 76
- Downloads
- 1,783
- Makes
- 4
- Views
- 7,869
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple print to live-calibrate Z-offset.
At least in Prusaslicer, this prints such that each line is drawn first, then the square for each line is filled in, in succession.
This is drawn at a 0.1mm layer height. In Prusaslicer this works fine for 0.1mm and 0.2mm first layer height. For 0.3mm, scale Z to 0.3mm, etc.
Aside from that, you will probably want to print your perimeters very slowly, this gives you more time to adjust.