1 / 5
Captain Hook Returns!
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Presentation
This new version of the hook is composed of 8 parts:
- The three new parts: the sleeve, cuff links screw and nut: these parts can be used to hang keys
- The original parts (the same parts as supplied in the previous design):
- The base: the core of the hook, used to be fixed on a wall. (It also serves as a secret compartment, but do not tell anyone 😉)
- The base of the hook : it is the door of the secret compartment.
- The hook : it is used to hang lightweight objects
- The axle : connects the base of the hook to the base
- The screw of the hook : it is used to connect the hook and its base together
Printing information
The hook, the axle and the cufflink screw need supports.
For more robustness, print the axle, the hook and the screw with a PC Blend filement or at least with a PETG one (avoid PLA if you can).
It is sufficient to print the parts with a layer height of 0.2mm, even for the screws and the axle.
Caution: don't print the new sleeve with the "Fuzzy skin" option because it contains a screw thread that will be misprinted when using this option.
Assembly instruction
- Screw the cuff link screw on the sleeve then screw the nut on the screw:
2. Please follow the previous assembly guide.