1 / 3
Bicycle Wheel Coasters and Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bicycle Wheel Coasters with a stand
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Print the holder flat on the bicycle side, the rear stand may be printed without support but to be safe, add a small support under the overhang.
The pins should be printed with the thicker side down and with supports. They are sort of friction fit and are angled 5 deg to help the wheel clear the frame when spinning. If you can get tolerances right you dont have to use glue however for my case I used a little bit of glue to keep the pins in place.
Coasters can be printed without ironing however the top finish is better with the option turned on.