Unifi UACC-PoE+++-10G PoE injector 10-inch rack mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2U 10" rack mount for Ubiquiti Unifi UACC-PoE+++-10G (90 W PoE Injector).
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 73
- Makes
- 0
- Views
- 631
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I want to minimize cableclutter as much as possible for my 10"-rack (by MandicReally). This 90W PoE+++ injector from Ubiquiti (UACC-PoE+++-10G) is a big honker so I decided to design a 2U mount instead of having it laying in a messy tray.
There's an endstop to ensure that the C5-plug doesn't interfere with the side of the rack and still leaves enough room for the RJ45 connectors in the opposite side.
It is a somewhat tight fit so you may have to wiggle and make sure that the bridges isn't pushed to far when inserting the injector.
Also consider using a bit of extra time to clean whatever debris there may be leftover from the supports.
I recommend using my .3mf to have the proper settings, but be aware that I have used 100% refill to make it as sturdy as possible.