WWII British SAS desert Jeeps hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LRDG!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: desertrats.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x178.65mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm
Filaments Used:
#000000 PLA+ Esun Black Transmission Distance: 0.1
#565d65 PLA+ Sunlu Grey Transmission Distance: 0.9
#aa6f3e PLA PolyLite Pro Army Beige Transmission Distance: 1.8
#cfe3c0 PLA Prusament Galaxy Silver Transmission Distance: 6.4
#ffffff PLA+ Sunlu White Transmission Distance: 7
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #10 (0.88mm) swap to Army Beige
At layer #12 (1.04mm) swap to Galaxy Silver
At layer #15 (1.28mm) swap to White for the rest.