Sculpfun iCube Ultra clamp & alignment set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this set includes everything you need to align your laser pieces on the cut table of the sculpfun iCube Ultra laser.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 21
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The Sculpfun iCube Ultra Laser comes with a non honeycomb cutting plate - this makes it difficult to clamp down wood or other parts. I Found no other solution out there so i made one myself.
I Printed the whole set in PETG.
0.2mm
no supports needed
The 2 long bars on the sides are glued with 2k epoxy glue.
Needed Hardwareparts:
- 2K Epoxy glue or other glue for the 2 side bars
- as many as possible threaded inserts -> M3x4x5
- Round 5x5 Magnets for the Bars
- string magnets for under the plate, i use 20x10x3mm (to fix the bars,L-Bars if you use them
- without height_wedge i use M3x8mm