1 / 1
Mini mic tripod for 5/8" (US) thread
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tiny print-in-place tripod/mic stand for large US mic thread (5/8"-27)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Made this because the 3/8" thread standard used by other mic stands is too flimsy for 3d-printed threads (in my experience). Most US mic mounts have a 5/8" thread with a 3/8" adapter that you can remove.
Print upright without supports but obviously it needs GOOD BED ADHESION. My recommendation is PLA+ on a smooth PEI bed, prints flawlessly on my Prusa.
Made to sit on a desk/table:
Legs are 72mm from center (fill 144mm diameter circle)
Height with thread: 68mm
8mm of exposed thread