Unifi AP AC-LR mounting bracket
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.81 – €1.00 net (excluding VAT)
For file: UniFi-AP-AC_LR v1_0.2mm_PLA_MK3S_55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.90 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 55.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a mounting bracket for the Unifi AP AC LR. The screw holes are countersunk, only need two when hanging!
- Rating
- 5 / 5
- Likes
- 65
- Downloads
- 1,188
- Makes
- 5
- Views
- 4,267
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Mounting bracket. Recommended to print with a 0.4 nozzle with a layer height of 0.2 or less!
For material, something that's more resistant to heat than PLA is advised. Commenter @jornthree_2921709 recommends PETG or ASA. I've used a PLA mount for the past 4 years but it'll heavily depend on the heat generation of your AP.
@ADAMX2313 notes "This Model will work on a Unifi U6 LR. You will need to Mirror the Model on the X Axis"